Browsing by Subject "Flocculation"

Now showing 1 - 1 of 1
  • Thumbnail Image
    Publication
    Open Access
    Improvement of coagulation-flocculation process using anionic polyacrylamide as coagulant aid.
    (Elsevier, 2005) Aguilar Sanchís, María Isabel; Sáez, José; Llorens Pascual del Riquelme, Mercedes; Soler, Antonio; Ortuño Sandoval, Juan Francisco; Meseguer Zapata, Víctor Francisco; Fuentes, Ana; Ingeniería Química
    A physicochemical treatment (coagulation-flocculation) was applied to a slaughterhouse wastewater, using anionic polyacrylamide as coagulant aid to improve the settling velocity of the flocs formed with the coagulants used: ferric sulphate, aluminium sulphate and polyaluminium chloride. The optimum speed and stirring time for the flocculation stage were ascertained along with the optimum pH and coagulant and coagulant aid doses. The speed and coagulation time were initially set according to recommendations in the literature concerning the treatment of this type of water. Chemical Oxygen Demand (COD), Biochemical Oxygen Demand at five days (BOD5) and Total Suspended Solids (TSS) were recorded at the beginning and end of each experiment in order to monitor the process. Once the optimal conditions had been established, several parameters were measured in order to assess the coagulation-flocculation process: particle number and size, sludge volume, nutrients (ammonia nitrogen, total Kjeldahl nitrogen, albuminoid nitrogen, orthophosphate, total phosphorus) and the residual concentration of iron and aluminium in clarified water. Anionic polyacrylamide, when added with ferric sulphate or polyaluminium chloride led to a significant increase in the settling speed.